File:Mimsy-build-fig-08.jpg
From Vorpal Robotics Wiki
Size of this preview: 800 × 533 pixels. Other resolutions: 320 × 213 pixels | 3,072 × 2,048 pixels.
Original file (3,072 × 2,048 pixels, file size: 1.75 MB, MIME type: image/jpeg)
Mimsy Build figure 8. It's easier to insert the 20-tooth gear with servo horn by holding the drive train with the servo on top. Slide the gear/horn in between the plates and using the large pie-shaped holes on the outer plate, position the gear/horn. You may need to spin it a little to align the gear teeth so it fits.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:25, 28 June 2015 | 3,072 × 2,048 (1.75 MB) | Vorpalwiki (talk | contribs) | Mimsy Build figure 8. It's easier to insert the 20-tooth gear with servo horn by holding the drive train with the servo on top. Slide the gear/horn in between the plates and using the large pie-shaped holes on the outer plate, position the gear/horn. Y... |
- You cannot overwrite this file.
File usage
There are no pages that link to this file.