The following Vorpal Robotics projects and products are documented on this wiki. This list offers a convenient jump off point to product information.
All of these items can be purchased from the [Vorpal Robotics Store].
- Vorpal The Hexapod This is our flagship product! A low cost, 3D-printed, Arduino based, Bluetooth controlled, MIT Scratch programmable Hexapod robot.
- Note: all individual hexapod kit parts are also available separately on the [Vorpal Robotics Store]
- Brillig Fidget Spinner Is a full color RGB LED lighted fidget spinner that flashes and fades between colors when spun. It uses a centrifugal force switch to automatically power on only when spinning, no on/off switch required. It will light for about 80 hours of spinning time before you need to replace the inexpensive and commonly available CR2032 coin cell battery.
- Vorpal Factory Paired Bluetooth Modules give you a convenient way to add radio communications to Arduino projects. These modules are pre-paired at the factory and provide a transparent serial connection within seconds of booting. You can have many of these pairs operating in the same room.
- Vorpal 12 RGB LED Light Ring
- Vorpal 7 RGB LED Light Ring
- Vorpal Color Blinking/Flashing Light Kit